Nema 8 (20mm) hybrid linear stepper motor
>> Nā wehewehe pōkole
| ʻAno kaʻa | stepper bipolar |
| Angle ʻanuʻu | 1.8° |
| Voltage (V) | 2.5 / 6.3 |
| I kēia manawa (A) | 0.5 |
| Kū'ē (Ohms) | 5.1 / 12.5 |
| Ka hoʻokuʻu ʻana (mH) | 1.5 / 4.5 |
| Uea Lead | 4 |
| Ka lōʻihi (mm) | 30 / 42 |
| Ka Mahana Kūlohelohe | -20 ℃ ~ +50 ℃ |
| Piʻi wela | 80K Max. |
| Ka ikaika dielectric | 1mA Max.@ 500V, 1KHz, 1Sec. |
| Kū'ē Kū'ē | 100MΩ Min.@500Vdc |
>> Nā ʻāpana uila
| Nui kaʻa | Voltage/Phase (V) | ʻĀpana / ʻĀpana (A) | Kū'ē /Phase (Ω) | Inductance /Phase (mH) | Helu o Uea Lead | Rotor Inertia (g.cm2) | Kaumaha Motor (g) | Loihi kaʻa L (mm) |
| 20 | 2.5 | 0.5 | 5.1 | 1.5 | 4 | 2 | 50 | 30 |
| 20 | 6.3 | 0.5 | 12.5 | 4.5 | 4 | 3 | 80 | 42 |
>> Nā ʻōlelo kikoʻī a me nā ʻāpana hana
| Anawaena (mm) | Ke alakaʻi (mm) | ʻanuʻu (mm) | E hoʻopau i ka ikaika paʻa ponoʻī (N) |
| 3.5 | 0.3048 | 0.001524 | 80 |
| 3.5 | 1 | 0.005 | 40 |
| 3.5 | 2 | 0.01 | 10 |
| 3.5 | 4 | 0.02 | 1 |
| 3.5 | 8 | 0.04 | 0 |
'Ōlelo Aʻo: E ʻoluʻolu e kelepona mai iā mākou no nā kikoʻī kikoʻī hou aku.
>> 20E2XX-XXX-0.5-4-100 maʻamau o waho kaʻa kiʻi outline outline
Notes:
Hiki ke hoʻopilikino ʻia ka lōʻihi o ke alakaʻi
Hiki ke hana machining ma ka hope o ka wili kepau
>> 20NC2XX-XXX-0.5-4-S maʻamau pio kaʻa kaʻa kiʻi outline
Notes:
Hiki ke hana machining ma ka hope o ka wili kepau
| ʻO ka maʻi S (mm) | Anana A (mm) | Ana B (mm) | |
| L = 30 | L = 42 | ||
| 9 | 14.6 | 0.4 | 0 |
| 12.7 | 18.3 | 4.1 | 0 |
| 19.1 | 24.7 | 10.5 | 0.3 |
| 25.4 | 31 | 16.8 | 6.6 |
| 31.8 | 37.4 | 23.2 | 13 |
| 38.1 | 43.7 | 29.5 | 19.3 |
| 50.8 | 56.4 | 42.2 | 32 |
>> 20N2XX-XXX-0.5-4-100 kiʻi kiʻi ʻoniʻoni maʻamau ʻole pio
Notes:
Hiki ke hoʻopilikino ʻia ka lōʻihi o ke alakaʻi
Hiki ke hana machining ma ka hope o ka wili kepau
>> Ka holo wikiwiki a me ka pihi ʻana
20 moʻo 30mm ka lōʻihi o ka moto bipolar Chopper drive
100% i kēia manawa pulse alapine a me ka pihi pihi (Φ3.5mm alakai screw)
20 moʻo 42mm ka lōʻihi o ka moto bipolar Chopper drive
100% i kēia manawa pulse alapine a me ka pihi pihi (Φ3.5mm alakai screw)
| Kepau (mm) | Ka wikiwiki laina (mm/s) | |||||||||
| 0.3048 | 0.3048 | 0.6096 | 0.9144 | 1.2192 | 1.524 | 1.8288 | 2.1336 | 2.4384 | 2.7432 | 3.048 |
| 1 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 |
| 2 | 2 | 4 | 6 | 8 | 10 | 12 | 14 | 16 | 18 | 20 |
| 4 | 4 | 8 | 12 | 16 | 20 | 24 | 28 | 32 | 36 | 40 |
| 8 | 8 | 16 | 24 | 32 | 40 | 48 | 56 | 64 | 72 | 80 |
Kūlana hoʻāʻo:
ʻO ka hoʻokele Chopper, ʻaʻohe ramping, hapalua micro-stepping, kaomi uila 24V
